GAF Lentar Super 8mm / 8mm /16mm Splicer w/ Buffing Tool Model M (Works great!)

Description

You are bidding on my GAF Lentar Dual Super 8mm / 8mm Splicer with buffing tool, Model M.  Don't be tempted to use cellophane tape to splice your movies!  They will jam in your film in your projector, or if you are your movies out to be digitized, may not be processed correctly.
The operation is simple:  you sandwich one strip of film between the upper and lower doors on the left side, and one piece on the right side, and then bring down the right side to properly trim the left film strip with the built in blade edge. Then you do the same with the right film strip, trimming the end with the left side trimmer. Then after lifting the right side, you swing the folded buffer up and run it back an forth a couple of time to buff the top of the left film.  Finally, using the extra buffer (which stores in the base), you buff the underside of the film on the right side. After applying the proper brush on film glue to one side, you snap the right section down, which applies pressure to the splice. Wait a few seconds, and  you have a perfect professional splice!
DISCOUNT NOTE:
If you buy more than one item from many of my auctions at the same time, and place them in your "eBay cart" AT THE SAME TIME you will receive a discount on each EACH item as follows:  2 - 5% off each, buy 10% off each, buy 4 or more - 15% off each!
Winner should send payment within 2 days of close of auction.   Good luck bidding!
©Shopperking1